Air Filter COMPAIR CF0036G1 Type C

To meet varying requirements, CompAir filters are available in five filter variants:

TYPE B: High Efficiency General Purpose Protection
Particle removal down to 1 micron, including water and oil aerosols. Maximum remaining oil aerosol content: 0.6 mg / m 3 at 21 °C / 0.5 ppm(w) at 70 °F.
TYPE C: High Efficiency Oil Removal Filtration
Particle removal down to 0.01 micron, including water and oil aerosols. Maximum remaining oil aerosol content: 0.01 mg / m 3 at 21 °C / 0.01 ppm(w) at 70 °F.
TYPE D: Oil Vapour & Odour Removal
Maximum remaining oil vapour content: 0.003 mg / m 3 at 21 °C / 0.003 ppm(w) at 70 °F.
TYPE E: General Purpose Dust Filtration
Dry particle removal down to 1 micron.
TYPE F: High Efficiency Dust Filtration
Dry particle removal down to 0.01 micron.
Common Characteristics
During the compression air can be contaminated with oil which is removed by filters. The filter efficiency is dependent on compressor type, age, design and condition. Filters are often setup in multistage. Fibre filters can only trap oil as droplets, while more efficient active carbon can trap oil as a vapour. We can help you select the right filters for your needs.