C10S cylinder model specially designed for natural stone quarrying has been constructed precisely for the properties required there. Thanks to its high splitting force, the C10S splitting cylinder breaks all types of natural stone very precisely and is particularly suitable for block extraction.
A reduced diameter of the splitting insert enables material-saving work. Particularly in this area of the natural stone industry, the even distribution of force when using several C10S splitting cylinders in series can achieve a very good splitting result. The C10S is ideal for use as a sliding cylinder for blocks that are stuck together, so-called “burnt” blocks. The splitting method does not cause hairline cracks in the rock, which can make the material unusable.
The handy stone and concrete splitting cylinder has an enormous power-to-weight ratio. One person can work in any position and even under water, while other work continues in parallel: Low noise, without vibrations and flying stones.
The splitting direction and the splitting course can be precisely determined via the control valve on the upper handle.
Robust multi-layer hoses reliably connect the splitting cylinder to the high-pressure hydraulic power unit, which delivers a system pressure of 50 Mpa (500 bar).
The predominant source material and the application requirements determine the splitting insert called the wedge set. This ensures that the best splitting result is always achieved.
Components made of the highest quality aluminum and steel materials guarantee a very long service life even under the hardest conditions. Maintenance work is almost obsolete.
The hard metal layer of the counter wedges enables the transmission of the very high forces and provides long-lasting protection against corrosion, seizure, and wear.
Tool locking system allows quick and easy replacement of the splitting insert on the job site.
Common Characteristics
Splitters are handheld demolition devices, which controllably split material with the use of hydraulic pressure. Above all they convince when larger conventional demolition devices are ruled-out because they produce dust, flying debris, vibration, noise and possibly exhaust fumes.
A complete splitting unit consists of one or more Splitters, high and low pressure hoses and also a hydraulic power unit.
• Enormous splitting force
• Dust free and near silent operation.
• Vibration free.
• Light weight.
• Dimensionally accurate working.
• Controllable at any time.
• Applicable at places of difficult access.
• Easy handling.
Technical Data
| Parameter | Value |
|---|
| Wedge set | N
|
| Required drill hole diameter | 41-43
mm |
| Minimum drill depth | 630
mm |
| Splitting distance | 18
mm |
| Splitting force, theoretical | 4945
kN/t |
| Splitting force, effective | 2550
kN/t |
| Weight /without hydraulic hoses/ | 33
kg |
| Length splitting cylinder | 1400
mm |
| Length wedge set | 230
mm |