The Hydraulic Splitter consists of a control valve, cylinder, front head, and wedge set (one wedge and two counter wedges). The entire Hydraulic Splitter is made of the highest quality aluminum and steel materials to ensure maximum load-bearing capacity and low weight. In a specially developed and complex hardening process, the counter wedges also receive a carbide layer. This makes it possible to transmit the very high forces.
Common Characteristics
Splitters are handheld demolition devices, which controllably split material with the use of hydraulic pressure. Above all they convince when larger conventional demolition devices are ruled-out because they produce dust, flying debris, vibration, noise and possibly exhaust fumes.
A complete splitting unit consists of one or more Splitters, high and low pressure hoses and also a hydraulic power unit.
• Enormous splitting force
• Dust free and near silent operation.
• Vibration free.
• Light weight.
• Dimensionally accurate working.
• Controllable at any time.
• Applicable at places of difficult access.
• Easy handling.
Technical Data
| Parameter | Value |
|---|
| Wedge set | N
|
| Required drill hole diameter | 31-32
mm |
| Minimum drill depth | 270
mm |
| Splitting distance | 9
mm |
| Splitting force, theoretical | 3490/355
kN/t |
| Splitting force, effective | 1913/195
kN/t |
| Weight /without hydraulic hoses/ | 17
kg |
| Length splitting cylinder | 745
mm |
| Length wedge set | 140
mm |