Anti-corrosive, reliable rust protection and rust converter
Rust emerges into a water-unsoluble, black, anorganic iron complex.
Air-drying
Easy to apply
Can be coated with all air-drying pains and aerosol paints
Very good solvent-resistance
Free of heavy metals and mineral acids
Can be mixed with water
Common Characteristics
Presto stop Rust Converter is a rust converter and primer in one work step.
This rust restoration system merges with the neutralized rust layer to a metallic-organic iron complex. As primer on surfaces infested with rust it forms the basis for a durable lacquer finish.
Excellently suitable for the restoration of vehicles, machines and all kinds of facilities.
Basis: water-based, chelating compound
Colour: beige
Smell: slight
Density at 20°C: 1.02 ± 0.05 g/cm?
Viscosity (20°C): 10 - 16 sec. in Ford cup no. 4
pH-value at 20°C: 2.2
Efficiency:
Depending on consistence of the ground
100 ml are sufficient for approx. 2 m?
250 ml are sufficient for approx. 5 m?
Drying time (at 20°C, 50% relative air humidity):
Coatable: earliest after 6 - 8 hours of air-drying
The drying time depends on temperature of surrounding area, air humidity and applied quantity.