Quadruple Leg Chain Slings

Common Characteristics

Chain slings are available in a range of material grades, sizes and assemblies. Select the slings to be used and plan the lift taking the following into account:
Type of sling to be used - endless, single, two, three or four leg.
Capacity - the sling must be both long enough and strong enough for the load and the slinging method.
Apply the mode factor for the slinging method.
If adjustment of the leg length is necessary select a sling with chain shortening clutches.
For use at temperatures exceeding 200°C or below minus 40°C refer to the suppliers instructions.
Where slings may come into contact with chemicals, particularly acids or acidic fumes, consult the supplier.
In the case of multi-leg slings the angle between the legs should not be less than 30° or exceed the maximum marked.
Multi-leg slings exert a gripping force on the load which increases as the angle between the legs increases and this must be taken into account. 

   Technical Data

Chain size, mm

WLL 0˚ - 45˚, kg

WLL 45˚ - 60˚, kg

6

2360

1700

7

3150

2240

8

4250

3000

10

6700

4750

13

11 200

8000

16

17 000

11 800

20

26 500

19 000

22

31 500

22 400

26

45 000

31 500

 


More products