The burr is suitable for steel castings, welds, hardened and soft high-strength steels.
Common Characteristics
LUKAS carbide burrs are manufactured using high quality types of carbide to guarantee precision and repeatability of angle, profile and twis. For safety reasons the largest possible shank diameter should always be selected from the table of the catalogue. The correct selection of speed is the basis of achieving optimum
machining results and long tool-life. The burr is suitable for steel castings, welds, hardened and soft high-strength steels.It is used for a finer surface finish.
Technical Data
| Parameter | Value |
|---|
| Head diameter D1 | 16
mm |
| Shank diameter D2 | 6
mm |
| Head length | 25
mm |
| Total length | 65
mm |
| Cut | Z3
|