LOW-PROFILE, MANUAL HORIZONTAL HOLD-DOWN CLAMPS.
Minimum overhead clearance is required for this low profile clamp
Common Characteristics
LOW-PROFILE, MANUAL HORIZONTAL HOLD-DOWN CLAMPS.
Minimum overhead clearance is required for this low profile clamp
• Clamp supplied with neoprene spindle
• Low profile
• Standard Material – Steel
• Clamp Arm Style - U-Bar
• Base Mounting Style - Flange
Technical Data
| Parameter | Value |
|---|
| Maximum Holding Capacity | 890
N |
| Clamp Arm Length | 57.4
mm |
| Height Under Clamp Arm | 25.4
mm |
| Clamp Bar Opening (degrees) | 87
° (+ 10 °) |
| Handle Opening (degrees) | 78
° (+ 10 °) |
| Duty Cycle | 2
|
| Weight | 0.15
kg |